Air headers are mainly used for Air Distribution and to centralized several connections. It uses in refineries, liquid petroleum gas processing plant, Petro-chemical plants, systems difficult to shut off due to solid contents dust, rust, dirt etc.
Inlet |
: |
DIN & ANSI ½” / 1” NB Flanged / Threaded Connections. |
Main Pipe |
: |
1”, 1-½”, 2” NB SCH 40 / 80 / 160/ XXS, Seamless |
Outlet ports |
: |
4way / 6way / 8way / 12way / 16way (Staggering or straight, Single sided or Double sided) |
Ports Size |
: |
¼” - ½” NB SCH 40 / 80 / 160/ XXS Nipple TOE. |
Valves |
: |
Fitted on outlet ports ¼” / ½” SS or Brass or A 105 Needle Valves / SS Ball Valves (Full or Reduced Port) |
Drain |
: |
½” SCH SCH 40 / 80 / 160/ XXS Nipple TOE fitted with SS Ball Valve & Drain plug. |
Pressure Test |
: |
150 psi. Pneumatic |
M.O.C |
: |
SS, CS, Alloy Steel, Monel etc. |
Mounting |
: |
Wall or Rack Mounting or ‘U’ clamps. |
Petrochemical
Chemical
Plastic Processing
Industrial Chemical Processing
Power Generation
Oil and Gas Offshore and Onshore
Air Distribution for Pneumatic Actuation.
Specifications/standards given in the following table are followed for threaded & Flanged end.
End Connection |
Reference Specifications |
NPT |
ASME B1.20.1, SAE AS71051 |
ISO/BSP Parallel |
ISO 228 |
ISO/BSP Tapered |
ISO 7, BS EN 10226-1 |
SAE (Unified) |
ASME B1.1 |
Flanged End |
ASME – B16.5 |
All the air header body & air header component manufactured by us are ultrasonically cleaned and free from oil and other impurities.